Feature Introduction
Precise Repair, Light-Speed Curing - Launched in collaboration with MADWORKS!
Light-curing putty is a paste-like model repair material that can cure quickly after exposure to UV light,
allowing you to easily and efficiently perform precise model repairs, fill holes, shape accurately, and reconstruct model forms.
【15 Seconds Light-Speed Curing】
Light-curing putty only takes a mere 15 seconds to cure, enabling you to quickly and efficiently carry out model repairs and shaping.
【Precise Repair of Damaged Parts】
Use the putty to restore damaged parts to their original shape or modify and enhance model details.
【Easy Operation and Good Shaping】
The paste-like material allows you to apply and shape any desired form at will.
【Easy Sanding and Painting】
After curing, the putty can be sanded and painted according to your needs, easily and effortlessly.
Application Range
- Restoration of model fractures and damage
- Filling cracks or gaps at component joints
- Model glue theft, reshaping missing parts
- Filling resin drainage holes
Usage
- Before use, please clean the area of the model where the putty will be applied to remove dust and dirt.
- Use the provided wooden stick to take an appropriate amount of putty and evenly apply it to the model's surface.
- Use a small amount of alcohol to smooth the surface of the putty and remove any excess (adjust according to personal usage needs).
- Use a Cure Beam - UV post-curing lamp or other LED curing equipment with a wavelength above 395nm to irradiate for 15-30 seconds.
- For best results, please position the curing lamp 1 cm away to ensure the UV light penetrates to the bottom of the putty.
Specifications
- Contents: 1 box of light-curing putty, 1 wooden stick
- Product weight: 60g
- Appearance (before curing): (slightly yellow gel)
- Appearance (after curing): (white solid)
- Tensile strength: 130-160 kg/cm²
- Hardness: 76-80
- Solid density: 1.3-1.4 g/cm³
*The above are experimental test data, and any changes in content will not be notified.
Precautions
- Please avoid direct sunlight on this product.
- When applying a thickness of 1mm-8mm, the curing irradiation time is approximately 15 seconds to 3 minutes. Please adjust the actual curing time according to the thickness.
- When using this product, gloves must be worn and avoid contact with skin.
- If the putty comes into contact with skin or eyes, please wash immediately with plenty of water and seek medical attention promptly.
- Light-curing putty may generate high temperatures after prolonged curing, please handle with care.
- Please keep this product out of reach of infants and young children.