Introduction
Phrozen Water-Washable washable dental model resin with extreme precision designed for dental use. Its water-soluble properties and good hydrophilicity can directly wash the surface with water, making it easy to operate. Low shrinkage makes the printed objects less prone to deformation and warping, and high resolution is suitable for printing fine objects and models.
Features
Extremely high precision
The model was scanned by a Medit desktop scanner, and more than 90% of the variation fell within a very small range of ± 0.05mm, making it suitable for dental use and achieving a near-perfect combination with removable molds.
washable resin
Phrozen washing resin is different from general greasy resins, with good water solubility and hydrophilicity. It can be washed directly with water, making it simple and easy to operate.
Low shrinkage high resolution
Phrozen washed dental model resin has the characteristics of low shrinkage, and the printed objects are not easy to deform and warp, and the high resolution is suitable for printing fine objects and models.
Moderate viscosity, low odor
Phrozen washing resin has low viscosity, easy operation and easy cleaning, and does not produce annoying odor when printing, which affects the environment.
Precautions
Please use and store this resin at room temperature, in a dark and ventilated place.
Before using the resin, shake the resin evenly.
Recommended cleaning method: alcohol spray cleaning and air gun drying, such as soaking alcohol should not exceed 30 seconds
After use, please store the resin in an opaque bottle and avoid mixing with new materials.
Please keep this material out of reach of infants and young children and avoid direct sunlight.
Please wear gloves and a mask when operating. If skin or eyes come into contact with resin, wash immediately with plenty of water.
It is forbidden to dump this material arbitrarily. If you want to scrap it, please solidify the material and recycle the solid according to "general resources".
When unopened, it is recommended to store in a ventilated and cool place. The shelf life is 2 years. Please use it as soon as possible after opening.
Product Resources
SDS Material Safety Data Sheet/Resin Instructions for Use (Download)
Resin parameters - Please select the resin parameters according to the printer you are using