Extreme elasticity, high ductility
With four times the ultimate tensile strength (elongation at break: 391% *), the EL400 resin is as flexible and hard as rubber, providing long-term stability beyond its limits.
Extraordinary resilience, stable and non-deforming
With a rebound rate of 50-55%, it can quickly return to its original state after deformation. It is suitable for long-term testing and repeated verification of product development processes to ensure the durability of printed items.
Ideal soft material with both elasticity and toughness and high tear resistance
The test model can easily withstand up to 60,000 repeated bends *, with a tear strength of 39.1 kN/m. Its rubber-like flexibility makes it difficult to damage after long-term use, allowing you to easily create infinite possibilities.
* Bending fatigue test (23 ° C, 60 ° bending, 100 cycles/min)
Precautions
Please use and store this resin at room temperature, in a dark and ventilated place.
Before using the resin, shake the resin evenly.
Recommended cleaning method: alcohol spray cleaning and air gun drying, such as soaking alcohol should not exceed 30 seconds
After use, please store the resin in an opaque bottle and avoid mixing with new materials.
Please keep this material out of reach of infants and young children and avoid direct sunlight.
Please wear gloves and a mask when operating. If skin or eyes come into contact with resin, wash immediately with plenty of water.
It is forbidden to dump this material arbitrarily. If you want to scrap it, please solidify the material and recycle the solid according to "general resources".
When unopened, it is recommended to store in a ventilated and cool place. The shelf life is 2 years. Please use it as soon as possible after opening.
Resources
SDS Material Safety Data Sheet/Resin Instructions for Use (Download)
Resin parameters - Please select the resin parameters according to the printer you are using