Order Model
Bambu Lab H2C
Vortek Hotend Replacement System
Fully automatic material replacement
The Vortek system seamlessly collaborates with the highly reliable AMS (Automatic Material System), fully automating the entire material replacement process—no need to manually load each material into the tool head.
Why choose Vortek?
Top-tier printing performance
Higher high-speed reliability and instant error detection capabilities.
The PMSM servo extruder can provide a maximum extrusion force of up to 10 kg—70% higher than stepper motors—significantly enhancing the stability of high-flow extrusion.
The proprietary servo architecture samples resistance and position at a frequency of 20 kHz, actively detecting material wear and clogging in real-time.
50µm ultra-fine motion accuracy
With its visual encoder, the H2C can achieve distance-independent motion accuracy of less than 50 microns (thinner than a human hair).
The system can automatically compensate for any mechanical drift during the calibration process, ensuring stable accuracy and outstanding performance over time.
Smooth surfaces, sharp edges
The H2C uses servo motors on the extruder and high-resolution eddy current sensors on the nozzle to perceive extrusion dynamics.
This allows for more precise extrusion control and automatic calibration of pressure advance (PA) parameters for each material, resulting in smoother surfaces and clearer, sharper edges.
Maximising the potential of high-performance materials
The H2C's 65°C active heating chamber and 350°C nozzle minimise warping and deformation while enhancing inter-layer adhesion, enabling high-performance, high-temperature filaments.
Comprehensive print monitoring
The H2C is equipped with 59 sensors* and a four-camera computer vision system, all working together with our proprietary neural network algorithms.
During the printing process, the system provides intelligent real-time diagnostics, detecting even the slightest printing anomalies in an instant.
You don't need to be an expert to troubleshoot—your printer will handle it automatically.
AI Camera
The H2C is equipped with an AI-driven camera system. This smart monitoring system can continuously track extrusion patterns, instantly detecting material build-up, material deviations, and extrusion failures.
Additionally, it performs a pre-flight scan to ensure safe operation.
Top-notch air filtration
The H2C's three-stage filtration system is crucial for engineering material printing.
The powerful combination of G3 pre-filter, H12 HEPA filter, and coconut shell activated carbon filter effectively reduces odours and harmful particulate matter often generated during the printing process of engineering materials.
Flame-retardant construction
The H2C's chamber is entirely made of flame-retardant materials, providing robust passive fire safety protection for the entire enclosure.
Flexible network security and connectivity
H2C provides convenient cloud connectivity features, allowing remote control from any device.
For applications with higher security requirements, it also offers complete offline functionality, ensuring total physical isolation. Users can operate the printer, transfer files, and update firmware without needing to connect to the internet.
For advanced users, the developer mode enables MQTT port access, facilitating the integration of third-party components and software.
Revolutionise
FDM printing solution
Bambu Lab H2C - Technical Specifications
Printing technology
Fused Deposition Modelling (FDM)
Body
| Print volume (W × D × H) | Single nozzle print: 325x320x325 mm³ (left) Single nozzle print: 305x320x325 mm³ (right) Double nozzle print: 300x320x325 mm³ Total volume for two nozzles: 330x320x325 mm³ |
| Chassis | Aluminium and steel |
| Frame | Plastic and glass |
Physical dimensions
| Physical dimensions | 492x514x626 mm³ |
| Net weight | 32.5 kg |
Nozzle
| Extruder gear | Hardened steel |
| Nozzle | Hardened steel |
| Maximum nozzle temperature | 350 °C |
| Compatible nozzle diameters | 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm |
| Filament cutter | Built-in |
| Filament diameter | 1.75 mm |
| Extruder motor | High-precision permanent magnet motor from Tuo Bamboo Lab |
Heated bed
| Build plate material | Flexible steel plate |
| Random build plate type | Textured PEI sheet |
| Supported build plate types | Textured PEI sheet, engineering board |
| Maximum heated bed temperature | 120 °C |
Speed
| Maximum nozzle movement speed | 1,000 mm/s |
| Maximum nozzle acceleration | 20,000 mm/s² |
| Maximum hotend flow rate | 40 mm³/s (Test conditions: single outer wall 250mm cylindrical model, Tuo Bamboo ABS filament, print temperature 280 °C) |
Chamber temperature control
| Active chamber heating | Support |
| Maximum temperature | 65 °C |
Air Purification
| Pre-filter Grade | G3 |
| HEPA Filter Grade | H12 |
| Activated Carbon Filter Type | Granular Coconut Shell Carbon |
| Volatile Organic Compounds (VOC) Filtration | High Grade |
| 懸浮微粒過濾 | Support |
Cooling System
| Component Cooling Fan | Closed Loop Control |
| Hot End Cooling Fan | Closed Loop Control |
| Main Control Board Fan | Closed Loop Control |
| Chamber Exhaust Fan | Closed Loop Control |
| Chamber Thermal Circulation Fan | Closed Loop Control |
| Auxiliary Component Cooling Fan | Closed Loop Control |
| Tool Head Enhanced Cooling Fan | Closed Loop Control |
耗材種類
PLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, Nylon (PA), PET, PPS; Carbon Fiber / Glass Fiber Reinforced: PLA, PETG, PA, PET, PC, ABS, ASA, PPA, PPS
Sensors
| Real-time Monitoring Camera | Built-in, 1920×1080 |
| Nozzle Monitoring Camera | Built-in, 1920×1080 |
| Panoramic Overhead Camera | Built-in, 3264×2448 (Laser Version Model Equipped) |
| Nozzle Lens | Built-in, 1600×1200 |
| Machine Door Sensor | Support |
| Material Outage Detection | Support |
| Material Entanglement Detection | Support |
| Material Length Measurement | Compatible with AMS Material System Support |
| Power Outage Resume Printing | Support |
Power Requirements
| Input Voltage | 100–120 VAC / 200–240 VAC, 50/60 Hz |
| Maximum Power* | 1800 W (220 V) / 1250 W (110 V) |
| Typical Operating Power | 200 W (220 V) / 200 W (110 V) (Single Nozzle Printing PLA) |
Operating Environment Temperature
10 °C-30 °C
Electronic Devices
| Touch Screen | 5 inch 720×1280 |
| Storage Device | Built-in 8GB eMMC + USB Port |
| Operating Interface | Touch Screen, Mobile App, Computer Software |
| Motion Control Chip | Dual-core Cortex-M4 + Single-core Cortex-M7 |
| Application Processor | Quad-core ARM (Built-in NPU Neural Network Processing Unit) |
Software
| Slicing Software | Bambu Studio Standard G-code third-party slicing software (Super Slicer, PrusaSlicer, Cura, etc.) can be imported, but some advanced features are not available. |
| Supported operating systems | MacOS, Windows, Linux |
Network control
| Wired network | Not provided |
| Wireless network | Wi-Fi |
| Network emergency disconnection switch | Not provided |
| Removable network module | Not provided |
| 802.1X network access control | Not provided |
Wi-Fi
| Operating frequency band | FCC/CE specifications: 2412 – 2472 MHz, 5150 – 5850 MHz SRRC specifications: 2400 – 2483.5 MHz, 5150 – 5850 MHz |
| Wi-Fi transmission power (EIRP) | 2.4 GHz: FCC < 23 dBm; CE/SRRC/MIC < 20 dBm 5 GHz band 1/2: FCC/CE/SRRC/MIC < 23 dBm 5 GHz band 3: CE < 30 dBm; FCC < 24 dBm 5 GHz band 4: FCC/SRRC < 23 dBm; CE < 14 dBm |
| Wi-Fi transmission protocol | IEEE 802.11 a/b/g/n |