YUZI Matt Red Clay Resin - 500g

Introduction

• 【Vibrant and Striking Colour】Yuzi (友子)  matte red clay light-curing resin has vibrant colours, with a special matte and frosted texture that differs from the glossy texture of other resins.
• ​​【High Resolution Texture】High resolution can perfectly present the details and holes of high-density image files, as well as its surface texture being delicate and soft, making it particularly suitable for printing complex shapes such as anime characters and miniature object models.
  
• 【Low Shrinkage and High Hardness】Yuzi (友子)  matte red clay light-curing resin has low shrinkage and high hardness characteristics due to the addition of nano-particle ceramics, making printed objects less prone to deformation and warping, and more suitable for printing models that require assembly.
• 【Moderate Viscosity and Adhesion】The printed objects have balanced and moderate adhesion to the build platform, making them easy to detach during the printing process without easily pulling away from the platform.
• 【Good Flow and Easy Printing】Yuzi (友子)  matte red clay light-curing resin has good fluidity, a wide range of printing parameters, easy printing, saves printing time, and produces clear details.
  

• • Please use and store this resin at room temperature, in a dark and well-ventilated place.
  • Before using the resin, please shake it evenly.
  • After use, please store the resin in an opaque bottle and avoid mixing it with new material.
  • Please keep this material out of reach of infants and young children, and avoid direct sunlight.
  • Please wear gloves and a mask while operating. If skin or eyes come into contact with the resin, please wash immediately with plenty of water.
  • It is prohibited to pour this material arbitrarily; if disposal is needed, please cure the material completely and recycle the solid as 'general resource material'.

Layer Height: 0.05mm

Normal Layer Exposure Time: 4.0 - 5.0s

Bottom Layer Exposure Time: 40 - 50s

Lift Distance: 6mm

Rest Time: 5s