Not enough stock.
Your item was not added to your cart.
Not enough stock.
Please adjust your quantity.
Limit {{ product.max_order_quantity }} per order.
Only {{ quantityOfStock }} item(s) left.
Designed to be easily cleaned bywater, Phrozen’s Water-Washable Resins are sturdy, durable, and print withspeed.
Customized for a 405nm LCD printer,the Water-Washable Resin takes only 7 seconds for cure time using the ShuffleXL
and 1.5 seconds using Phrozen’s Sonic printers.
This resin works best for printing3D figurines as well as product prototypes.
Spec
Weight: Black 500g per bottle / Model Gray 1KG per bottle
XY Resolution: 50 µm
Recommended Layer Height: 30-100 um
Ways to Rinse: Clean with water & spray with air gun.
Viscosity: 149 cps
Proportion: 1.05
Tg:87 °C
Elongation: 14 %
Break Value: 21 MPa
Surface Hardness: Shore 80D
I- ZodImpact:1.52 KJ/m2
II- Use and preserve resins in room temperature, dark, and ventilatedcondition.
III- Shake well before use.
IV- After printing, please keep used resins in a closed & opaque bottle.Avoid mixing used resin with new resin.
V- Keep resin away from kids and away from direct sunlight exposure.
VI- Wear gloves and masks when using resins. Wash with plenty of water if youget direct skin contact or eye contact with resins.
VII- DO NOT dump resin. Please cure it and treat it as general plastic garbage.